Ip Admission Name Proxy Http - Cisco WS-C2350-48TD-S Command Reference Manual

Command reference
Table of Contents

Advertisement

Chapter 2
Catalyst 2350 Switch Cisco IOS Commands

ip admission name proxy http

Use the ip admission name proxy http global configuration command to enable web authentication.
Use the no form of this command to disable web authentication.
Syntax Description
This command has no arguments or keywords.
Defaults
Web authentication is disabled.
Command Modes
Global configuration
Command History
Release
12.2(46)EY
Usage Guidelines
The ip admission name proxy http command globally enables web authentication on a switch.
After you enable web authentication on a switch, use the ip access-group in and ip admission web-rule
interface configuration commands to enable web authentication on a specific interface.
Examples
This example shows how to configure only web authentication on a switchport:
Switch# configure terminal
Switch(config) ip admission name http-rule proxy http
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# ip access-group 101 in
Switch(config-if)# ip admission rule
Switch(config-if)# end
Related Commands
Command
flowcontrol
ip admission
show ip admission
OL-19055-01
ip admission name proxy http
no ip admission name proxy http
Modification
This command was introduced.
Description
Create a web authentication fallback profile.
Enable web authentication on a port
Displays information about NAC cached entries or the NAC configuration.
For more information, see the Network Admission Control Software
Configuration Guide on Cisco.com.
ip admission name proxy http
Catalyst 2350 Switch Command Reference
2-81

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 2350

Table of Contents