Cisco WS-C2350-48TD-S Command Reference Manual page 411

Chapter 2 Catalyst 2350 Cisco IOS Commands
notification-type
Defaults
This command is disabled by default. No notifications are sent.
If you enter this command with no keywords, the default is to send all trap types to the host. No informs
are sent to this host.
If no version keyword is present, the default is Version 1.
If Version 3 is selected and no authentication keyword is entered, the default is the noauth
(noAuthNoPriv) security level.
Command Modes
Global configuration
Command History Release
12.2(46)EY
OL-19055-01
(Optional) Type of notification to be sent to the host. If no type is specified,
all notifications are sent. The notification type can be one or more of the
these keywords:
bridge—Send SNMP Spanning Tree Protocol (STP) bridge MIB traps.
•
cluster—Send cluster member status traps.
•
config—Send SNMP configuration traps.
•
copy-config—Send SNMP copy configuration traps.
•
entity— Send SNMP entity traps.
•
envmon—Send environmental monitor traps.
•
flash—Send SNMP FLASH notifications.
•
• fru-ctrl—Send entity FRU control traps.
• snmp—Send SNMP-type traps.
• storm-control—Send SNMP storm-control traps.
stpx—Send SNMP STP extended MIB traps.
•
syslog—Send SNMP syslog traps.
•
tty—Send TCP connection traps.
•
udp-port port—Configure the User Datagram Protocol (UDP) port
•
number of the host to receive the traps. The range is from 0 to 65535.
vlan-membership— Send SNMP VLAN membership traps.
•
vlancreate—Send SNMP VLAN-created traps.
•
vlandelete—Send SNMP VLAN-deleted traps.
•
vtp—Send SNMP VLAN Trunking Protocol (VTP) traps.
•
Modification
This command was introduced.
Catalyst 2350 Switch Command Reference
snmp-server host
2-387