Cisco WS-C2350-48TD-S Command Reference Manual page 228

remote-span
Examples This example shows how to configure a VLAN as an RSPAN VLAN.
Switch(config)# vlan 901
Switch(config-vlan)# remote-span
This example shows how to remove the RSPAN feature from a VLAN.
Switch(config)# vlan 901
Switch(config-vlan)# no remote-span
You can verify your settings by entering the show vlan remote-span user EXEC command.
Related Commands Command
monitor session
vlan (global
configuration)
Catalyst 2350 Switch Command Reference
2-204
Description
Enables Switched Port Analyzer (SPAN) and RSPAN monitoring on a port
and configures a port as a source or destination port.
Changes to config-vlan mode where you can configure VLANs 1 to 4094.
Chapter 2 Catalyst 2350 Switch Cisco IOS Commands
OL-19055-01