Debug Ip Igmp Filter - Cisco WS-C2350-48TD-S Command Reference Manual

Appendix B Catalyst 2350 Debug Commands

debug ip igmp filter

Use the debug ip igmp filter privileged EXEC command to enable debugging of Internet Group
Management Protocol (IGMP) filter events. Use the no form of this command to disable debugging.
Syntax Description
This command has no arguments or keywords.
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(46)EY
Usage Guidelines The undebug ip igmp filter command is the same as the no debug ip igmp filter command.
Related Commands Command
show debugging
OL-19055-01
debug ip igmp filter
no debug ip igmp filter
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Catalyst 2350 Switch Command Reference
debug ip igmp filter
B-9