Cisco WS-C2350-48TD-S Command Reference Manual page 78

diagnostic schedule
•
•
•
•
Examples
This example shows how to schedule diagnostic testing for a specific day and time:
Switch(config)# diagnostic schedule test 1,2,4-6 on november 3 2006 23:10
This example shows how to schedule diagnostic testing to occur weekly at a specific time on a switch:
Switch(config)# diagnostic schedule test TestPortAsicMem weekly friday 09:23
Related Commands Command
show diagnostic
Catalyst 2350 Switch Command Reference
2-54
test-id-range—Enter the show diagnostic
ID list. Enter the range as integers separated by a comma and a hyphen (for example, 1,3-6 specifies
test IDs 1, 3, 4, 5, and 6).
hh:mm—Enter the time as a 2-digit number (for a 24-hour clock) for hours:minutes; the colon (:) is
required, such as 12:30.
For mm dd yyyy:
mm—Spell out the month, such as January, February, and so on, with upper case or lower case
–
characters.
dd—Enter the day as a 2-digit number, such as 03 or 16.
–
yyyy—Enter the year as a 4-digit number, such as 2006.
–
day-of-week—Spell out the day of the week, such as Monday, Tuesday, and so on, with upper case
or lower case characters.
content command to display the test numbers in the test
Description
Displays online diagnostic test results.
Chapter 2 Catalyst 2350 Switch Cisco IOS Commands
OL-19055-01