Cisco WS-C2350-48TD-S Command Reference Manual page 33

Chapter 2 Catalyst 2350 Switch Cisco IOS Commands
archive upload-sw
Use the archive upload-sw privileged EXEC command to upload an existing switch image to a server.
Syntax Description
/version version_string
destination-url
Defaults Uploads the currently running image from the flash: file system.
Command Modes Privileged EXEC
Command History Release
12.2(46)EY
Usage Guidelines Use the upload feature only if the HTML files associated with the embedded device manager have been
installed with the existing image.
The files are uploaded in this sequence: the Cisco IOS image, the HTML files, and info. After these files
are uploaded, the software creates the tar file.
Image names are case sensitive.
OL-19055-01
archive upload-sw [/version version_string] destination-url
(Optional) Specify the specific version string of the image to be uploaded.
The destination URL alias for a local or network file system. The
image-name.tar is the name of software image to be stored on the server.
These options are supported:
•
•
•
•
•
•
Modification
This command was introduced.
Local flash file system syntax:
flash:
FTP syntax:
ftp:[[//username[:password]@location]/directory]/image-name.tar
HTTP server syntax:
http://[[username:password]@]{hostname |
host-ip}[/directory]/image-name.tar
Secure HTTP server syntax:
https://[[username:password]@]{hostname |
host-ip}[/directory]/image-name.tar
Remote Copy Protocol (RCP) syntax:
rcp:[[//username@location]/directory]/image-name.tar
TFTP syntax:
tftp:[[//location]/directory]/image-name.tar
Catalyst 2350 Switch Command Reference
archive upload-sw
2-9