Debug Platform Frontend-Controller - Cisco WS-C2350-48TD-S Command Reference Manual

Appendix B Catalyst 2350 Debug Commands

debug platform frontend-controller

Use the debug platform frontend-controller privileged EXEC command to enable debugging of
front-end controller activity. Use the no form of this command to disable debugging.
Syntax Description
all
image
led
manager
register
thermal
Though visible in the command-line help strings, the poe keyword is not supported.
Note
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(46)EY
Usage Guidelines The undebug platform frontend-controller command is the same as the no debug platform
frontend-controller command.
Related Commands Command
show platform
frontend-controller
show debugging
OL-19055-01
debug platform frontend-controller {all | image | led | manager | register | thermal}
no debug platform frontend-controller {all | image | led | manager | register | thermal}
Display all the debug messages for front-end controller.
Display Image Manager debug messages.
Display LED debug messages.
Display front-end-controller manager debug messages.
Display Register Access debug messages.
Display thermal debug messages.
Modification
This command was introduced.
Description
Displays counter and status information for the front-end controller
manager and subordinate applications, and displays the hardware and
software information for the front-end controller.
Displays information about the types of debugging that are enabled.
debug platform frontend-controller
Catalyst 2350 Switch Command Reference
B-23