Line Configuration Mode - Cisco WS-C2350-48TD-S Command Reference Manual

Chapter 1 Using the Command-Line Interface
CLI Command Modes
The supported commands can vary depending on the version of software in use. To display a
comprehensive list of commands, enter a question mark (?) at the prompt.
Switch(config-line)# ?
To exit line configuration mode and to return to global configuration mode, use the exit command. To
exit line configuration mode and to return to privileged EXEC mode, enter the end command, or press
Ctrl-Z.
Catalyst 2350 Switch Command Reference
1-5
OL-19055-01