Sdm Prefer - Cisco WS-C2350-48TD-S Command Reference Manual

Chapter 2 Catalyst 2350 Cisco IOS Commands
Table 2-10
templates for a switch. The values in the template are based on 8 routed interfaces and 1024 VLANs and
represent the approximate hardware boundaries set when a template is selected. If a section of a
hardware resource is full, all processing overflow is sent to the CPU, seriously impacting switch
performance.
Table 2-10
Resource
Unicast MAC addresses
Internet Group Management Protocol (IGMP) groups and
multicast routes
Unicast routes
Directly connected hosts
•
• Indirect routes
Policy-based routing access-control entries (ACEs)
Quality of service (QoS) classification ACEs
Security ACEs
VLANs
Table 2-11
templates for a switch.
Table 2-11
Resource
Unicast MAC addresses
IPv4 IGMP groups and multicast routes
Total IPv4 unicast routes:
Directly connected IPv4 hosts
•
• Indirect IPv4 routes
IPv6 multicast groups
Directly connected IPv6 addresses
Indirect IPv6 unicast routes
IPv4 policy-based routing ACEs
IPv4 or MAC QoS ACEs (total)
IPv4 or MAC security ACEs (total)
IPv6 security ACEs
OL-19055-01
lists the approximate number of each resource that is supported in each of the IPv4-only
Approximate Number of Feature Resources Allowed by IPv4 Templates
lists the approximate number of each resource supported in each of the dual IPv4-and IPv6
Approximate Feature Resources Allowed by Dual IPv4-IPv6 Templates
Access Default
4 K 6 K
1 K 1 K
6 K 8 K
4 K 6 K
2 K 2 K
0.5 K 0
0.5 K 0.5 K
2 K 1 K
1 K 1 K
Default VLAN
2 K 8 K
1 K 1 K for IGMP groups
0 for multicast routes
3 K 0
2 K 0
1 K 0
1 K 1 K
2 K 0
1 K 0
0 0
0.5 K 0.5 K
1 K 1 K
1 K 0.5 K
Catalyst 2350 Switch Command Reference

sdm prefer

VLAN
12 K
1 K
0
0
0
0
0.5 K
1 K
1 K
2-207