Show Mls Qos Aggregate-Policer - Cisco WS-C2350-48TD-S Command Reference Manual

show mls qos aggregate-policer

show mls qos aggregate-policer
Use the show mls qos aggregate-policer user EXEC command to display the quality of service (QoS)
aggregate policer configuration. A policer defines a maximum permissible rate of transmission, a
maximum burst size for transmissions, and an action to take if either maximum is exceeded.
Syntax Description aggregate-policer-name
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(46)EY
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show mls qos aggregate-policer command:
Switch> show mls qos aggregate-policer policer1
aggregate-policer policer1 1000000 2000000 exceed-action drop
Not used by any policy map
Related Commands Command
mls qos aggregate-policer
Catalyst 2350 Switch Command Reference
2-336
show mls qos aggregate-policer [aggregate-policer-name] [ | {begin | exclude | include}
expression]
(Optional) Display the policer configuration for the specified name.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Description
Defines policer parameters that can be shared by multiple classes
within a policy map.
Chapter 2 Catalyst 2350 Cisco IOS Commands
OL-19055-01