Cisco WS-C2350-48TD-S Command Reference Manual page 160

match (class-map configuration)
This example shows how to specify a range of physical ports to which an interface-level class map in a
hierarchical policy map applies:
Switch(config)# class-map match-all class4
Switch(config-cmap)# match input-interface gigabitethernet0/1 - gigabitethernet0/5
Switch(config-cmap)# exit
You can verify your settings by entering the show class-map privileged EXEC command.
Related Commands Command
class-map
show class-map
Catalyst 2350 Switch Command Reference
2-136
Description
Creates a class map to be used for matching packets to the class whose name
you specify.
Displays quality of service (QoS) class maps.
Chapter 2 Catalyst 2350 Switch Cisco IOS Commands
OL-19055-01