Show Controllers Ethernet-Controller Fastethernet - Cisco WS-C2350-48TD-S Command Reference Manual

Chapter 2 Catalyst 2350 Cisco IOS Commands

show controllers ethernet-controller fastethernet

Use the show controllers ethernet-controller fastethernet privileged EXEC command to display
information about the Ethernet management port, including the port status and the per-interface send and
receive statistics read from the hardware.
Syntax Description phy [detail]
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC (only supported with the fastethernet 0 keywords in user EXEC mode)
Command History Release
12.2(46)EY
Usage Guidelines
The output display provides information that might be useful for Cisco technical support representatives
troubleshooting the switch.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show controllers ethernet-controller fastethernet 0 command.
See
Switch> show controller ethernet-controller fastethernet 0
OL-19055-01
show controllers ethernet-controller fastethernet 0 [phy [detail]] [ | {begin | exclude | include}
expression]
(Optional) Display the status of the internal registers on the switch physical layer
device (PHY) for the Ethernet management port on the switch.
Use the detail keyword to display details about the PHY internal registers.
This display includes the operational state of the automatic medium-dependent
interface crossover (auto-MDIX) feature on an interface.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Table 2-13 and Table 2-14
Transmit FastEthernet0
5925 Bytes
0 Unicast frames
15 Multicast frames
1 Broadcast frames
0 Too old frames
0 Deferred frames
0 MTU exceeded frames
0 1 collision frames
0 2 collision frames
0 3 collision frames
0 4 collision frames
for descriptions of the Transmit and Receive fields.
Receive
33181 Bytes
437 Multicast frames
Catalyst 2350 Switch Command Reference
show controllers ethernet-controller fastethernet
78 Unicast frames
0 Broadcast frames
0 Unicast bytes
0 Multicast bytes
0 Broadcast bytes
0 Alignment errors
0 FCS errors
0 Oversize frames
0 Undersize frames
2-245