Link State Track - Cisco WS-C2350-48TD-S Command Reference Manual

Chapter 2 Catalyst 2350 Switch Cisco IOS Commands

link state track

Use the link state track global configuration command to enable a link-state group. Use the no form of
this command to disable a link-state group.
Syntax Description
number
Defaults
Link-state tracking is disabled for all groups.
Command Modes Global configuration
Command History Release
12.2(46)EY
Usage Guidelines Use the link state track global configuration command to enable a link-state group.
Examples This example shows how enable link-state group 2:
Switch(config)# link state track 2
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands Command
link state group
show running-config
OL-19055-01
link state track [number]
no link state track [number]
Modification
This command was introduced.
Description
Configures an interface as a member of a link-state group.
Displays the operating configuration. For syntax information, use this
link to the Cisco IOS Release 12.2 Command Reference listing page:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_comm
and_reference_list.html
Select the Cisco IOS Commands Master List, Release 12.2 to navigate
to the command.
(Optional) Specify the link-state group number. The group number can
be from 1 to 2. The default is 1.
Catalyst 2350 Switch Command Reference
link state track
2-123