Cisco WS-C2350-48TD-S Command Reference Manual page 305

Chapter 2 Catalyst 2350 Cisco IOS Commands
Trunking VLANs Enabled: ALL
Pruning VLANs Enabled: NONE
Capture Mode Disabled
Capture VLANs Allowed: ALL
Protected: false
Unknown unicast blocked: disabled
Unknown multicast blocked: disabled
Appliance trust: none
Table 2-17
Field
Name
Switchport
Administrative Mode
Operational Mode
Administrative Trunking
Encapsulation
Operational Trunking Encapsulation
Negotiation of Trunking
Access Mode VLAN
Trunking Native Mode VLAN
Trunking VLANs Enabled
Trunking VLANs Active
Pruning VLANs Enabled
Protected
Unknown unicast blocked
Unknown multicast blocked
Voice VLAN
Administrative private-vlan
host-association
Administrative private-vlan mapping
Operational private-vlan
Appliance trust
This is an example of output from the show interfaces interface-id pruning command:
Switch# show interfaces gigibitethernet0/2 pruning
Port
OL-19055-01
show interfaces switchport Field Descriptions
Vlans pruned for lack of request by neighbor
Description
Displays the port name.
Displays the administrative and operational status of the port.
In this display, the port is in switchport mode.
Displays the administrative and operational modes.
Displays the administrative and operational encapsulation
method and whether trunking negotiation is enabled.
Displays the VLAN ID to which the port is configured.
Lists the VLAN ID of the trunk that is in native mode. Lists the
allowed VLANs on the trunk. Lists the active VLANs on the
trunk.
Lists the VLANs that are pruning-eligible.
Not applicable on this switch.
Displays whether or not unknown multicast and unknown
unicast traffic is blocked on the interface.
Not applicable on this switch.
Not applicable on this switch.
Not applicable on this switch.
Not applicable on this switch.
Displays the class of service (CoS) setting of the data packets
of the connected device.
Catalyst 2350 Switch Command Reference
show interfaces
2-281