Cisco WS-C2350-48TD-S Command Reference Manual page 242

setup
!
cluster enable cluster-name
!
end
Use this configuration? [yes/no]: yes
!
[0] Go to the IOS command prompt without saving this config.
[1] Return back to the setup without saving this config.
[2] Save this configuration to nvram and exit.
Enter your selection [2]:
Related Commands Command
show running-config
show version
Catalyst 2350 Switch Command Reference
2-218
Description
Displays the operating configuration. For syntax information, use
this link to the Cisco IOS Release 12.2 Command Reference listing
page:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_co
mmand_reference_list.html
Select the Cisco IOS Commands Master List, Release 12.2 to
navigate to the command.
Displays version information for the hardware and firmware.
Chapter 2 Catalyst 2350 Cisco IOS Commands
OL-19055-01