Debug Pagp - Cisco WS-C2350-48TD-S Command Reference Manual

Appendix B Catalyst 2350 Debug Commands

debug pagp

Use the debug pagp privileged EXEC command to enable debugging of Port Aggregation Protocol
(PAgP) activity. Use the no form of this command to disable debugging.
Syntax Description
all
dual-active
event
fsm
misc
packet
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(46)EY
Usage Guidelines The undebug pagp command is the same as the no debug pagp command.
Related Commands Command
show debugging
show pagp
OL-19055-01
debug pagp [all | dual-active | event | fsm | misc | packet]
no debug pagp [all | dual-active | event | fsm | misc | packet]
(Optional) Display all PAgP debug messages.
(Optional) Display dual-active detection messages.
(Optional) Display PAgP event debug messages.
(Optional) Display PAgP finite state-machine debug messages.
(Optional) Display miscellaneous PAgP debug messages.
(Optional) Display PAgP packet debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Displays PAgP channel-group information.
Catalyst 2350 Switch Command Reference
debug pagp
B-17