Show Cluster - Cisco WS-C2350-48TD-S Command Reference Manual

Chapter 2 Catalyst 2350 Cisco IOS Commands

show cluster

Use the show cluster user EXEC command to display the cluster status and a summary of the cluster to
which the switch belongs. This command can be entered on the cluster command switch and cluster
member switches.
Syntax Description | begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(46)EY
Usage Guidelines If you enter this command on a switch that is not a cluster member, the error message
cluster member
On a cluster member switch, this command displays the identity of the cluster command switch, the
switch member number, and the state of its connectivity with the cluster command switch.
On a cluster command switch, this command displays the cluster name and the total number of members.
It also shows the cluster status and time since the status changed. If redundancy is enabled, it displays
the primary and secondary command-switch information.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples This is an example of output when the show cluster command is entered on the active cluster command
switch:
Switch> show cluster
Command switch for cluster "Ajang"
OL-19055-01
show cluster [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
appears.
Total number of members:
Status:
Time since last status change:
Redundancy:
Standby command switch: Member 1
Standby Group:
Standby Group Number:
Heartbeat interval:
Heartbeat hold-time:
Extended discovery hop count:
7
1 members are unreachable
0 days, 0 hours, 2 minutes
Enabled
Ajang_standby
110
8
80
3
Catalyst 2350 Switch Command Reference
show cluster
Not a management
2-229