Table of Contents
Advertisement
Error! Reference source not found. User Guide
Advanced Setup
LAN Settings
Device IP Address
Router IP Address
Network Mask
Bandwidth Utilization
This feature (on multi-port models only) determines how
multiple serial port connections are handled. The options are
Money Saving Mode (the default) and Time Saving Mode.
In Money Saving Mode, additional serial ports will only be
connected when bandwidth utilization is high.
In Time Saving Mode, whenever a connection is required, all
serial ports will always be used, even for a single user.
Change Device Password
Once a password is entered, it is required in order to change
the device configuration. The password can be up to 8 alpha-
numeric characters and is case sensitive.
The Meta Password (see the Sensitive Information page at the
front of this booklet) can be used if the password is lost. This
meta password works only in Terminal Mode configuration.
18
IP address for the Error! Reference
source not found.. Use the default
value unless the address is already in
use.
If you have a router, enter its IP
Address. Otherwise, leave this at the
default value.
The default value 255.255.255.0 is
OK for small networks. For larger
networks, ask the LAN administrator.
Advertisement
Table of Contents
