Table of Contents
Advertisement
Error! Reference source not found. User Guide
Browser Mode Configuration
Overview
This method uses your existing WEB browser. Most WEB
browsers should work, provided they support tables and forms.
The Error! Reference source not found. must be installed on
your LAN first.
Connection
To establish a connection from your PC to the device:
Start your WEB browser
In the Address box, enter "HTTP://" and the IP Address of
the Error! Reference source not found., as in the follow-
ing example:
HTTP://192.168.0.1
Password
You should then see the first screen, which will prompt you for
a password. If no password has been set, just click OK to
continue to the Start screen. The Start screen contains helpful
information for first-time users.
Navigation & Data Input
Most screens contain a navigation bar on the left of the screen
allows you to move about. You can also use the "Back" button
on your Browser.
Remember that changing to another screen without clicking
"OK" does NOT save any changes you may have made. HTML
uses "forms based input" which means you must send (submit)
the form (by clicking a button) or your data will be ignored.
30
Advertisement
Table of Contents
