Table of Contents
Advertisement
Error! Reference source not found. User Guide
Terminal Configuration Screens
Once the device is powered on, the configuration program will
start. If nothing appears on your screen, press the ESC key.
The first screen will have a menu selection for each port. The
4-port model looks as follows:
[ Basic configuration ]
Local LAN:
>Device IP address: 192.168.0.1
Network mask: 255.255.255.0
WAN port settings:
[Port 1]
[Port 2]
[Port 3]
[Port 4]
[Advanced Settings]
[Change console password]
Clear all settings and restore factory defaults
Save and reset device
-----------------------------------------------------
See LAN Settings on page 17 for details of the "Device IP
Address" and "Network Mask". (Note: The "Router IP Ad-
dress" is on the Advanced screen.)
To configure a port, select it, and then press [Enter]. A screen
like the following will be shown.
>Port 1
Single user account:
IP address: 0.0.0.0
User Name: GUEST
Password:
DNS IP address: 0.0.0.0
Line type: Dial up line
26
[ WAN port Settings ]
Version 5.0
Advertisement
Table of Contents
