Table of Contents
Advertisement
Error! Reference source not found.
Figure 2: Error! Reference source not found.
LED Indicators
1
Error LED
2
Link LED
3, 4
Serial Port
Indicators
See Figure 4: Back Panel on page 7 for connector details.
This LED is used to indicate an error,
but it will normally light up during
power On. See the following LED
Status Table for more details.
This LED should be on during
normal operation. For more informa-
tion, see the following LED Status
Table .
These LEDs flash when the relevant
port is in use.
Introduction
5
Advertisement
Table of Contents
