Table of Contents
Advertisement
Port
DHCP Table
Configuration Programs
For each port, the possible status
values are "Enabled" or "Disabled".
Ports are initially Disabled, but are
automatically Enabled when data is
entered. This setting is on the Ad-
vanced Port Settings screen.
This table will be empty unless
DHCP has been "Enabled". If DHCP
is being used, this table lists the
devices which have been allocated IP
Addresses by the DHCP server
function. Only IP Addresses in use
will be listed.
I.P. Address. The IP Address
which has been allocated by the
DHCP server to the other device.
Physical Address. The Physical
Address (Hardware Address) of
the device which has been allo-
cated a IP Address.
Status. Possible Status values
are "Leased" (the IP Address is
allocated to the device shown) or
"Exclusive" (the IP Address is
not available).
Note: The device will reserve
one address for future de-
vice enhancements. This
address will be shown as
"Exclusive".
39
Advertisement
Table of Contents
