Navigation & Data Input
Once the Error! Reference source not found. is powered On,
the configuration program will automatically start. If nothing
appears on your screen, press ESC.
Use the TAB or cursor keys to move to the desired field and
press ENTER. You can then input a value directly, or select
from a predefined list of values. Note that those options con-
tained in brackets [ ] have submenus.
The following table lists all available keystrokes.
Keystroke
ESC
TAB or è or
ê
ç or é
ENTER
CTRL+D
CTRL+R
Description
Used to escape the input fields or return to
the previous menu. Pressing ESC while at
the first panel will refresh the first panel.
Moves to the cursor to the next option in
descending order. If the selected option is
the last option, pressing anyone of these
keys will return you to the first option.
Moves the cursor to the next option in
ascending order. If the selected option is
the first option, either of these keys will
return you to the last option.
Used to select the current option for con-
figuration.
Used to restore the factory default settings
to the active screen. Submenus will not be
affected.
Refresh screen.
Configuration Programs
25