Error! Reference source not found. User Guide
Normal Operation
The following sequence of messages is typical of normal
operation.
send "ATDT 0123456789"
CONNECT 115200
max phone line speed 28800 bps
physical line is connected
start PPP
ppp up successfully
Error Conditions
The following messages indicate an error condition.
No dial tone
The modem could not obtain a dial tone. Check your con-
nections on the phone line and the modem.
Busy error
The number dialed was busy. Check that the number is
correct. If it is, try dialing later. If this occurs regularly,
check with your ISP.
DCD low, DSR low
The connection was lost. This could indicate a bad line or
poor connection. Normally, if a connection is lost, it will
automatically be re-established, unless the "Dial on de-
mand" setting is OFF.
PPP up fail
The ISP rejected the attempt at connection. Check that
your username and password is correct. If it is, check with
your ISP to see why the connection is being rejected.
58