Error! Reference source not found. User Guide
LED Status Table (All Models)
Link
Error
On
On
On
Off
Flashing
Off
Steady flashing of
both LEDs
Rapid intermittent
flashing of each LED
DIP Switch Table (All Models)
DIP Switch Setting
1=off 2=off
1=off 2=on
1=on 2=off
1=on 2=on
8
Description
During power On, both LEDs should
light then the Red LED should go off.
If both LEDs stay on, there is a
hardware problem.
Normal Operation (Power On Self
Test OK)
Normal Operation (Receiving Pack-
ets from LAN)
Terminal configuration mode. (Both
DIP switches ON.)
If the device is not in the configura-
tion mode, there is a hardware error.
Contact your dealer for technical
support.
Description
Normal Operation
Normal Operation
Normal Operation
Terminal Configuration Mode