Table of Contents
Advertisement
Error! Reference source not found. User Guide
Advanced Port Settings
Most users should not have to change these settings.
Port Settings
Enable/Disable
Hang up after
Idle Time
Serial Line Speed
Modem/ISDN Settings
Dial Type
Dial String
16
If Enabled, a connection will be
made as needed. Use "Disable" to
temporarily disable the port when
required.
If a connection remains inactive, it is
terminated after this time period.
Allowable range is 0-99 minutes. For
a leased line, set this value to 0.
Select the speed which is equal to or
below the fastest SERIAL line speed
(NOT phone line speed) of your
modem. Available speeds range from
4.8K to 230.4.K (bps).
Select "Tone", "Pulse" or "Other" to
match your system. For "Other", you
must provide the Dial String below.
Only required if you are NOT using
Tone or Pulse dialing.
Enter the command (sometimes
called the "Dial Prefix String") your
modem requires to precede the phone
number..
Advertisement
Table of Contents
