Table of Contents
Advertisement
E
Terminal
Programs
This section explains how to configure and use a Terminal
(Communications) program, as required to perform the
Terminal Mode Configuration described on page 21.
Windows 95
The terminal communications program provided with Win-
dows 95 is called HyperTerminal. To configure it for use with
the Error! Reference source not found., the procedure is as
follows.
1. Click and follow the selection
Start Menu-Programs-Accessories-HyperTerminal.
2. Start the HyperTerminal Program.
3. You should now be prompted for New connection. Enter
Null Modem as the name. (A Null Modem is a direct con-
nection using a Null Modem cable.)
4. Select an icon to represent the connection, and click OK.
The screen should now appear like the example shown be-
low.
74
Advertisement
Table of Contents
