Table of Contents
Advertisement
D
Script files
This section describes the script file commands and syntax to
be used when creating script files.
Script files are only required if your ISP does not use a stan-
dard PPP connection and authentication.
Commands
Three commands can be used to automate a proprietary nego-
tiation process. The commands are as follows:
Send
Send [msec] <string>
Send a data string, with a. [msec] (milliseconds)
delay between the sending of each character.
Wait [msec]
Wait
Wait for the specified time (milliseconds) to
elapse before executing the next script line.
Wait
Wait [msec] <string>
Wait for the specified time (milliseconds) to
receive the string. If the string is not received
within the specified time, the connection is
reset. An error conditions arises if [msec] is not
specified and the string is not received immedi-
ately.
70
Advertisement
Table of Contents
