Table of Contents
Advertisement
Error! Reference source not found. User Guide
Physical Address
Hardware ID
IP Address
Network Mask
Router IP Address
Bandwidth
Utilization
DHCP
E-Mail Sharing
38
cal support staff may ask for this
information.
The hardware address of this device.
The hardware ID of this device, used
by the manufacturer for identifica-
tion.
The IP Address of this device.
The Network Mask value stored in
this device. This must match the
Network Mask for the LAN segment
to which this device is connected.
The IP Address (for this LAN seg-
ment) of the router. If there is no
router, this should be 0.0.0.0
This will show "Time Saving Mode"
or "Money Saving Mode". In Time
Saving Mode, all ports are ALWAYS
used, even for a single user. In
Money Saving Mode, additional ports
are only used when the connected
port(s) are being heavily used (i.e.
Bandwidth Utilization is high).
This shows the status of the DHCP
Server function. The value will be
"Enabled" or "Disabled".
If E-mail sharing is used on any E-
mail account, this will display "ON".
Otherwise, the status will be "OFF".
Advertisement
Table of Contents
