Table of Contents
Advertisement
DHCP Server
A DHCP server provides a valid IP address (and the Gateway
and DNS addresses) to a DHCP client (PC or device) upon
request. The Error! Reference source not found. can act as a
DHCP server.
Enable/Disable
Start IP Address
Finish IP Address
DNS IP Address
Note: To use DHCP, you must also configure your PCs
to act as DHCP clients. Client support for DHCP
If Enabled, the Error! Reference
source not found. will function as a
DHCP server. The default value is
Disabled.
The I.P. Start Address and I.P.
Finish Address fields set the values
used by the DHCP server.
This range also determines the
number of DHCP clients supported.
(Maximum number of clients is 50.)
If you have any DNS (Domain Name
Server) system(s) on your LAN, enter
their IP Addresses here.
Otherwise, enter the IP Address(es)
provided by your ISP. Multiple
entries should be entered in the order
you want them accessed. (The first
available DNS will be used.)
If the only DNS you use is the one
provided by your ISP AND you don't
use the E-Mail feature, then you can
leave these fields blank.
Configuration
19
Advertisement
Table of Contents
