Table of Contents
Advertisement
Error! Reference source not found. User Guide
16. In future, you can start HyperTerminal by clicking on the
"Null Modem" icon you created during this session.
Windows 3.1
The communications program provided with Windows 3.1 is
called "Terminal". To use it to configure the Error! Refer-
ence source not found., the procedure is as follows.
1. Start the "Terminal" Program. By default, it is in the
"Accessories" group.
2. Select the "Settings" menu. All of the necessary settings
are on this menu.
3. To prepare for a direct serial cable connection, choose
"Modem Commands" and set the modem to "None".
4. Select "Terminal Emulation" and set it to "VT100".
5. Select "Communications" to obtain a dialog box like the
one shown below.
78
Advertisement
Table of Contents
