Advanced Router Setup; Access Your Router Management Page - TRENDnet TEW-721BRM User Manual

TRENDnet User's Guide
 DSCP: Select the DSCP value to apply
 Source/Destination MAC Address: Enter the source and destination MAC address
of the rule.
Generic Rules
1. To create a new rule. Click Add in the Rules section.
2. Review the settings and click Apply to save.
 Filter Name: Select the filter name to apply the rule. Enter the name of the filter.
 Enable: Check to enable rule
 Type: Select the value type to apply on the rule.
 Proto: Select the IP Protocol data type
 Position: Specify the location of the packet location
 Condition: Select the condition type of the rule
 Value: Enter the IP checksum value of the packet
 Action: Select the action to take of the rule.
© Copyright 2014 TRENDnet. All Rights Reserved.

Advanced Router Setup

Access your router management page

Note: Your router management page
your Internet web browser (e.g. Internet Explorer, Firefox, Chrome, Safari, Opera) and
will be referenced frequently in this User's Guide.
1. Open your web browser (e.g. Internet Explorer, Firefox, Safari, Chrome, or Opera)
and go to http://192.168.10.1. Your router will prompt you for a user name and
password.
2. Enter the default user name and password and then click Login.
Default User Name: admin
Default Password: xxxxxxxxxx
TEW-721BRM
http://192.168.10.1 is accessed through the use of
22