Table of Contents
Advertisement
Error! Reference source not found. User Guide
Setting
Terminal Emulation
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control
4. Start the configuration program by connecting the power to
the Error! Reference source not found.. If nothing ap-
pears on your screen, press ESC.
5. Configure the Error! Reference source not found. as
described in the following section. Save the configuration
data before exiting.
6. Turn the power OFF and set the dip switches to their
normal (Off) positions. You are now ready to install the
Error! Reference source not found. in your LAN.
24
Value
VT100 mode
19200bps
8-bit
no parity
1 stop bit
Xon/Xoff OR None
Advertisement
Table of Contents
