Configuration Programs; Terminal Mode Configuration; Procedure - TRENDnet TW-200 User Manual

4
Configuration
Programs
There are 2 methods of configuration:
Terminal Mode, using the supplied serial cable and a
communications program.
Browser mode, which requires the use of your existing
WEB browser. This uses the LAN connection, so the de-
vice must be installed on the LAN first.

Terminal Mode Configuration

Procedure

1. With the power Off, use the supplied serial cable to connect
your PC to the serial port on the Error! Reference source
not found..
For multi-port models, you MUST use Port 1.
2. Set both of the Error! Reference source not found.'s dip
switches to the Configuration mode (both Switches ON).
3. Configure your communications program as shown in the
following table.
Details on configuring and using common communications
programs are contained in Appendix E - Terminal Pro-
grams.
23