Table of Contents
Advertisement
3. If the ping command fails, check that the
4. Check that the Port is "Enabled" (Ad-
5. Run your Browser and connect to the
Problem 3:
My Modem/ISDN TA is working fine with a
direct connection. How do I find what "Initial
String" it is using?
Solution 3:
Use the procedure described in Finding the
current Initial String on page 60.
Problem 4:
Data Transmissions are very slow.
Check and ensure that the Initial String is
Solution 4:
configured to RTS/CTS flow control.
found.. Use the "Run" command to enter
the following command:
Ping xxx.xxx.xxx.xxx
where xxx.xxx.xxx.xxx is the IP address as-
signed to the Error! Reference source not
found.'s LAN interface.
Error! Reference source not found. is
connected and ON. If it is connected and
on, there is a problem with your LAN.
vanced Port Settings). If it is not, you need
to use the HTML program to establish a
connection.
Error! Reference source not found..
Switch to the "Status" screen, and examine
the Log. Details of the Log messages, and
the possible causes of any errors, are shown
in Appendix B - Log Messages.
A - Troubleshooting
53
Advertisement
Table of Contents
