Table of Contents Table of Contents English ... 1. Before You Start 2. Hardware Installation ... Configure the Router ... Troubleshooting ... Version 10.11.2006...
1. Before You Start Installation Requirements A computer with a wired or wireless network adapter properly installed. Broadband Internet Installed Cable or DSL Modem Web Browser: Internet Explorer (5.0 or higher) Application 4-Port Workstations with Fast Ethernet Adapter (TE100-PCIWN) TW100-S4W1CA Quick Installation Guide User's Guide CD-ROM 1 x RJ-45 Ethernet Cable...
2. Hardware Installation Note: Gather all information related to your Internet Connection before you start. If necessary, contact your Internet Service Provider (ISP). 1. Verify that you have an Internet connection when connecting your computer directly to the Cable or DSL modem.
3. Configure the Router 1. Open your web browser, type http://192.168.0.1 in the Address bar, and press Enter. 2. Enter User name and Password, and then click LOGIN. User name: admin By default, there is no password. 3. Click Quick Setup. 4.
Page 6
ISP. Follow the wizard instructions to complete the configuration. Your configuration is now complete. For detailed information regarding the TW100-S4W1CA's configuration and advanced settings, please refer to the Troubleshooting section, User's Guide CD-ROM, or TRENDnet's website at http://www.trendnet.com. English...
Troubleshooting I typed http://192.168.0.1 in my Internet Browser's Address Bar, but an error message says “The page cannot be displayed.” How can I get into the TW100-S4W1CA's web configuration page? First, check your hardware settings again by following the instructions in Section 2.
Page 8
Wait for the modem to fully boot up, and then reconnect the power to the router. If you still encounter problems or have any questions regarding the TW100-S4W1CA, please contact TRENDnet's Technical Support Department.
Page 9
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.
Need help?
Do you have a question about the TW100 S4W1CA and is the answer not in the manual?
Questions and answers