Table of Contents
Advertisement
A
Troubleshooting
This chapter covers some common problems that may be
encountered while using the Error! Reference source not
found. and some possible solutions to them. If you follow the
suggested steps and the Error! Reference source not found.
still does not function properly, contact your dealer for further
advice.
Problem 1:
I configured and installed the Error! Refer-
ence source not found. in the network, but I
can't get it to respond.
If the configuration settings are correct, then
Solution 1:
you probably forgot to set the dip switches back
to their Off positions after configuration. Power
Off the Error! Reference source not found.
and ensure that the dip switches are in their Off
positions.
When I enter a URL or IP address I get a time
Problem 2:
out error.
Any number of things could be causing this.
Solution 2:
Try the following troubleshooting steps.
1. If this is first time you have used your
2. Ping the Error! Reference source not
browser, ensure that your workstations IP
settings are correct, including IP address,
default gateway and DNS.
52
Advertisement
Table of Contents
