Features - TRENDnet TPE-3012LS User Manual

TRENDnet User's Guide

Features

TRENDnet's Gigabit PoE+ Smart Surveillance Switch series is designed to simplify the
installation and management of surveillance networks, especially for integrators and
installers. These ONVIF switches are optimized for the surveillance industry; surveillance
mode provides a graphical dashboard interface with detailed information about the
switch and each connected PoE device. Connect ONVIF compliant IP cameras and NVRs
for more advanced capabilities such as changing device IP settings, and to view
individual IP camera video within the switch GUI. The Smart Surveillance Switches are
also PoE self-healing switches featuring PoE device auto-recovery and power scheduling.
Installers and integrators can save on equipment costs and reduce installation time with
TRENDnet's Gigabit PoE+ Smart Surveillance Switches by delivering up to 30W per port
of PoE power and data over existing Ethernet cables. Available PoE port controls include
enabling and disabling PoE, PD alive check, and power scheduling. PD alive check is an
automated PoE self-healing switch feature that attempts to recover an unresponsive
PoE device connected to the switch. If a PoE device such as a PoE camera becomes
unresponsive to pings, the ONVIF compliant switch will auto-reboot the PoE port in an
attempt to recover the device.
These PoE+ ONVIF switches feature a 4-digit LED display showing total PoE power,
available power, and power-per-port. They also support long distance PoE+ networking
up to 656 ft./200m away at speeds up to 10mbps. TRENDnet's Gigabit PoE+ Smart
Surveillance Switches also feature SFP slots to support long-distance fiber networking
applications.
Advanced managed switch features include LACP to group ports to increase bandwidth
between switches, VLANs for segmenting and isolating virtual LAN groups, QoS for
traffic prioritization, port bandwidth controls, and SNMP monitoring, making this ONVIF
switch a powerful SMB network solution. Improve voice performance by isolating and
prioritizing VoIP traffic from normal data traffic with the easy-to-use voice VLAN feature.
Hardware Design
Provides gigabit PoE+ ports, SFP slots for fiber connectivity, and a 1U 19" rackmount
design with brackets included
PoE Power
Each PoE+ managed ONVIF switch supplies up to 30W of power per port and data over a
single Ethernet cable to PoE devices
© Copyright 2020 TRENDnet. All Rights Reserved.
Surveillance Mode
ONVIF switches are optimized for the surveillance industry, proving a graphical
dashboard interface with useful information about the switch and each connected
device
Troubleshooting
Real-time traffic comparison charts, error group charts, and a convenient cable
diagnostic test aid in rapid troubleshooting.
Long Range PoE+
Long distance PoE+ networking up to 656 ft./200m away at speeds up to 10mbps
4-Digit PoE LED Display
4-digit 7-segment LED display to view total power, available power, and power-per-port
IPv6 Ready
ONVIF switches support IPv6 configuration and IPv6 neighbor discovery
Traffic Management
Managed switch features include: Link aggregation, 802.1Q VLAN, Voice VLAN,
Surveillance VLAN, RSTP, MSTP, Loopback Detection, QoS, and port bandwidth
management
Troubleshooting
A convenient cable diagnostic test and traffic statistics aid in network troubleshooting
Monitoring
RMON, SNMP, and Port Mirroring support administrator monitoring solutions
TPE-3012LS / TPE-3018LS
2