NAC Image Technology MEMRECAM GO-4K User Manual page 91

About memory segments in MEMRECAM GO
Example A camera with 68GB memory divided into 5 segments
68GB of total memory
Memory remaining 4 seg-
ments 54.4GB
Recorded
68GB of total memory
Memory remaining 22.4GB
Recorded
Recording capacity
34GB
68GB of total memory
Recorded Memory remaining 22.4GB
68GB of total memory
(00519)
1
The segment is divided into 5 segments and
then triggered to record.
2
One segment was recorded.
If the recording time is longer than the current
setting, re-set the segmentation.
For example, the maximum segment that can
be set from the remaining memory is "34 GB"
in "2 segments".
(see table page 90)
3
After dividing into two segments, only one can
be recorded at a time.
There is enough memory remaining, but not
34 GB free, so it cannot record.
When recording is not possible, the trigger
button will be as shown in the figure.
4
Set the number of divisions (4 or more) to
continue recording while data remains in the
memory.
(see table page 90)
91
LIVE