NAC Image Technology MEMRECAM GO-4K User Manual page 89

Mem
Memory segment settings and trigger position settings can be made.
Erase All Memory
Button Function
Erase All Erase all images in memory.
1 to 50 Sets the memory segment partitioning.
This setting is used when recording phenomena that occur immediately
5% +95% after the trigger is input.
It is a conventional start trigger.
This setting is used when recording phenomena that occur before and
50% +50% after the trigger input.
It is a conventional center trigger.
This setting is used when recording a phenomenon that occurs just be-
95% +5% fore the trigger input (and is finished at the time of trigger input).
It is a conventional end trigger.
(00519)
Trigger position setting
89
Memory Segment Setting
LIVE