NAC Image Technology MEMRECAM GO-4K User Manual page 11

Respective LEDs
CAMERA MODE LED
LED Status
REC mode.
Displays trigger detection status while the camera image is being recorded by
memory. Indicates the recording status to the recording memory by changing
Orange
the brightness of orange due to light and dark.
After the trigger input, it changes from light to dark.
The less frames remaining, the darker the orange brightness.
ARM mode.
From the time ARM is started until the time the picture is recorded for the
number of frames before the trigger.
Yellow A change in brightness due to light and dark in yellow indicates the record-
ing status to the recording memory. Dark to Light: Indicates the lapse rate of
recording for the number of frames before triggering. It turns white when re-
cording is complete for the number of frames before triggering.
ARM mode.
Recorded memory is discarded, and the camera image is being recorded to
memory. Displays the recording status to the recording memory with the
change of white brightness due to light and dark.
The ratio of the light/dark changes varies depending on the trigger timing
White
setting.
Dark to Light: Indicates the lapse rate of recording for the number of frames
before triggering.
Light to Dark: Indicates the lapse rate of recording for the number of frames
after triggering.
Recording memory is full and cannot be recorded.
Blue
The camera is not recording video, but a live video is displayed (VIEW mode).
Not lit Power OFF or sleep state.
Set to EST mode, and EST pulse is input.
Flashing However, only ARM mode and REC mode. Flashing by alternately turning on
and off.
(00519)
External Appearance and Names of Each Part
Operation
11