NAC Image Technology MEMRECAM GO-4K User Manual page 13

Camera's
LED Status power sta-
Flashing orange
2-second cycle
(Lit for 1.5 sec, Power on
off for 0.5 sec-
onds)
Yellow Power on
Flashing blue
(1 Second inter- Power on
val)
Flashing green
(1 Second inter- Power on
val)
Not lit Power off
Red and green
alternating
lights
Operation
Turns the camera power on and off.
Short press The camera goes from the ON state to the sleep state.
The camera goes from sleep status to power on status.
Long press Forces the camera power from the ON state to the OFF state.
• All images recorded in the camera's memory will be lost if the power is turned
off, thermal shutdown occurs, or the camera goes to sleep.
• Thermal shutdown automatically shuts down the camera when the internal
temperature becomes extremely high.
• If a thermal shutdown occurs, turn off AC adapter or remove the battery, turn
off the power to the camera, and then turn it on again to restart.
• The fail status means that one of failure detection, power supply voltage ab-
normality detection, sensor temperature rise detection, trigger signal abnor-
mality detection, or setting abnormality detection has occurred during camera
activation.
(00519)
tus
Sleep state.
RESET button is pressed (maximum duration: approx. 1.9
sec.).
The status between the camera's power ON and the cam-
era's startup.
Camera is rebooting.
Factory reset in progress.
No external power supply.
Thermal shutdown occurs.
External Appearance and Names of Each Part
Operation
Function
13