NAC Image Technology MEMRECAM GO-4K User Manual page 77

ISO speed
Sensitivity
Tone
DarkCorrect
SatWhite
WB
(RGain
GGain
BGain)
(00519)
Sets the ISO sensitivity.
If MCFF is On, changes made here will not be reflected in the image,
so make changes within the live screen.
Sets the analog gain to be applied to the image sensor.
S1 Analog gain 0.5x
S2 Analog gain 1.0x (default setting)
S3 Analog gain 2.0x
Sets the video brightness tone curve characteristic.
A value close to the real-world characteristics is set to 1.
A larger value tends to make dark areas more subdued and image noise
more noticeable.
Lower values emphasize dark areas and make them more visible.
The default value is 1 for monochrome cameras and 1.55 for color cam-
eras.
Enables/disables correction to reduce noise patterns in dark areas. (If
MCFF is to be saved as a file, set this parameter to Off beforehand.)
Off No correction (default setting)
On Corrected
If MCFF is Off, this parameter determines whether or not the correction
is applied to naturalize the color tones in high-luminance areas.
Off No correction
On Corrected (default setting)
White Balance Setting
Custom Set the white balance manually. (Default setting)
3100K
This is used when the color temperature of the light
5000K source is known. There are three color temperatures that
can be set: 3100K, 5000K, and 9000K.
9000K
Sets the R (red) at CUSTOM. (Default value 1.8)
Sets the G (green) at CUSTOM. (Default value 1)
Sets the B (blue) at CUSTOM. (Default value 1.65)
77
LIVE