NAC Image Technology MEMRECAM GO-4K User Manual page 62

INFO
Fan
(Actual
Speed
Stop)
Temp (Sensor
Black
Remain)
MechShutter
Phase
LED
Button (FN.1
FN.2
FN.3
(Wi-Fi BTN )
FN.4
(e-paper)
EJECT)
IO-BOX
Camera fan speed setting
100%: Maximum speed
N u m e r i c a l
1%: Silence
input (%)
0%: Fan stopped
Fan rotation state (varies with internal temperature) (unit %)
Fan speed (unit rpm)
Indicates the graceful temperature at which the fan can be operated
with the fan stopped (unit: degree)
Image sensor temperature (unit :°C)
Image sensor temperature at black balance update (unit: °C)
Indicates the time interval until thermal shutdown (in seconds).
Operation state of mechanical shutter at black balance update
(Beginning of close → end of close → beginning of open → end of open)
Phase shift setting of exposure timing relative to one frame rate cycle
(setting unit °)
CAMERA MODE LED and POWER LED settings.
Off CAMERA MODE LED and POWER LED are turned off.
Low Dim the CAMERA MODE LED and POWER LED.
Mid CAMERA MODE LED and POWER LED as standard.
High Brighten CAMERA MODE LED and POWER LED.
Extra1 Same settings as Mid
H Button not pressed.
L Button is pressed.
H Button not pressed.
L Button is pressed.
H (ON)
H (not pressed)/L (pressed),
and Wi-Fi function ON (enabled)/OFF (disabled)
L (OFF)
H Button not pressed.
L Button is pressed.
H Button not pressed.
L Button is pressed.
In GO-4K, it is labeled GX-HUB.
62
(00519)