NAC Image Technology MEMRECAM GO-4K User Manual page 119

External USB Storage
Connecting and Disconnecting Storage
Note before connecting
Do not connect the camera with the following files in the root folder of the USB
storage device. The camera may freeze when connected.
<Files that should not be placed in the root folder>.
MCFF files taken with our MEMRECAM series other than the GO series
(Files with the extension ".MCF")
<In case of freeze>
(1) Turn off the external power supply and disconnect the USB storage device.
(2) Move the relevant files from the USB storage device and reconnect it to the
camera.
(3) Turn on the external power supply and start up the camera again.
Connection and Disconnection Flow
A) Connecting external USB storage
C) Reconnection
B) Eject
D) Removing external USB storage
What is Eject?
Eject is an internal process that removes the external USB storage device from the camera.
Please execute it before removing the external USB storage.
If Eject is executed during storage, the storage will be canceled.
The free space display of the external USB storage device is retrieved at the time of
connection. Please reconnect to update the data.
119
(00519)