Connect Camera And Tablet Pc - NAC Image Technology MEMRECAM GO-4K User Manual

Table of Contents

Connect Camera and tablet PC

Wi-Fi control of the camera with a tablet

The camera can be connected as shown in the connection example, and the tablet can be oper-

ated wirelessly.

In the example, the cameras connected to the network are connected through an access point.

Connection example

Camera

IP address 172.21.1.10

Camera

IP address 172.21.1.15

This section lists the fictitious SSID and other information. Set according to the

actual usage environment.

SSID may not be displayed on tablets depending on the access point settings.

Please refer to the instruction manual of the device for the access point settings,

etc.

For network environment, the use of 1000BASE-T or higher compatible devices

is recommended.

(00519)

Control PC

IP address 172.21.1.20

Network Hubs

1000BASE-T compli-

ant products

Wi-Fi Access Point

SSID NACWIFI-01

Example of network configuration

Subnet mask 255.255.0.0/16

Subnet gateway 172.21.1.1

Tablet

Table of Contents

Do you have a question about the MEMRECAM GO-4K and is the answer not in the manual?

St-907