NAC Image Technology MEMRECAM GO-4K User Manual page 134

System Control
PWR BTN & POWER LED (LED and button in one) (1/2) PWR BTN & POWER LED (LED and button in one) (1/2)
LED Status
Flashing white
White
Flashing red
(1 Second interval)
Orange
Flashing red
(0.5 Second inter-
val)
Flashing orange
(1 Second interval)
Flashing orange
2-second cycle
(Lit for 1.5 sec,
off for 0.5 seconds)
Yellow
Flashing blue
(1 Second interval)
Flashing green
(1 Second interval)
Camera's
power sta-
tus
Power on Camera is activated.
Power on Camera starts up and is in normal status.
Power on Fail (abnormal) state.
External power is being supplied and the camera is turned
off with the power switch.
Power off
The external power supply voltage is within the specifica-
tion range (13 to 32V) and in normal condition.
External power is being supplied and the camera is turned
off with the power switch.
Power off
The external power supply voltage is outside the specified
range (13 to 32V) and is abnormal.
From the moment the power is pressed until the power is
Power on
turned OFF.
Power on Sleep state.
RESET button is pressed (maximum duration: approx. 1.9
Power on
sec.).
The status between the camera's power ON and the cam-
era's startup.
Power on
Camera is rebooting.
Power on Factory reset in progress.
Operation
134
(00519)