Table of Contents
Advertisement
Time & Date Settings
7.1.2. Network Time Protocol (NTP) Synchronization
You can use the Network Time Protocol (NTP) to synchronize with computer clock time sources on a network.
Figure 22. Time & date page, NTP synchronization enabled
By default, NTP synchronization is disabled.
To use NTP synchronization:
1.
On the Time & date page, enable NTP synchronization.
2.
In the NTP server fields, enter the Server name or IP number of the NTP server.
You can enter up to four different NTP servers.
3.
In the Interval field, enter the number of minutes between the time synchronization attempts (1-65535).
SCM-1202-233 Version 1.0
®
Anybus
Tunnel Gateway
Page 27 of 45
Advertisement
Table of Contents
Need help?
Do you have a question about the Anybus AWB5300 and is the answer not in the manual?
Questions and answers