Table of Contents
Advertisement
Access the Built-In Web Interface
5.2.2. Login to the Built-In Web Interface
The Tunnel Gateway built-in web interface can be accessed from a standard web browser.
Before You Begin
IMPORTANT
For cybersecurity reasons, you are prompted to change the password at first login using the Tunnel
Gateway factory default password. You are redirected to the Change password page, see
Tunnel Gateway Password (page
NOTE
The Tunnel Gateway comes with a default password. You find the default password on the Tunnel
Gateway product housing.
NOTE
The Tunnel Gateway default IP address is 192.168.1.96 and the subnet mask is 255.255.255.0.
Procedure
Login to the Tunnel Gateway built-in web interface:
1.
Open a web browser.
2.
Click to select the Address bar and enter https:// and the Tunnel Gateway IP address.
Figure 7. Enter IP address in web browser
3.
Press Enter.
The Tunnel Gateway built-in web interface login screen appears.
4.
Enter Username and Password and click Login.
Figure 8. Built-in web interface login screen
Result
You are logged in to the Tunnel Gateway built-in web interface Home page.
SCM-1202-233 Version 1.0
36).
®
Anybus
Tunnel Gateway
Change the
Page 13 of 45
Advertisement
Table of Contents
Need help?
Do you have a question about the Anybus AWB5300 and is the answer not in the manual?
Questions and answers