Table of Contents
Advertisement
Reboot Using the Built-In Web Interface
8.3. Reboot Using the Built-In Web Interface
Before You Begin
During reboot, the Tunnel Gateway is temporarily unavailable for approximately two minutes.
Procedure
1.
Ensure that the Tunnel Gateway is powered on and running.
Figure 36. Power on the N/A
2.
Login to the Tunnel Gateway built-in web interface.
3.
On the System page, click Reboot.
Figure 37. System page, Reboot
SCM-1202-233 Version 1.0
®
Anybus
Tunnel Gateway
Page 39 of 45
Advertisement
Table of Contents
Need help?
Do you have a question about the Anybus AWB5300 and is the answer not in the manual?
Questions and answers